You can make a difference in the Apple Support Community!
When you sign up with your Apple Account, you can provide valuable feedback to other community members by upvoting helpful replies and User Tips.
When you sign up with your Apple Account, you can provide valuable feedback to other community members by upvoting helpful replies and User Tips.
It is running MacOS X 10.6 server. It gets past the main language screen and intro, but gets stuck on the “Welcome” screen, pictured below: I am not sure what is wrong. Could it be Ethernet? I’ve seen videos where it shows a region selection, but it doesn’t appear on mine?
I have a windows formatted keyboard if that helps
At the time of the installation, I had a usb mouse, hdmi, and power cord plugged in.
Earlier Mac models
It’s been a while but as I recall there needs to be an active network connection.
It does not need access to the internet initially although this would good for updates later on etc, just as long as there’s an active network locally it can connect to. It could be just the server by itself connected (obviously use an Ethernet cable if you have one) to a switch or hub. For 10.6 server to work well it needs correctly configured DNS either set up on itself (the setup wizard will help with this) or it picks it up from another server on the same network. It must also have a fixed IP address and an FQDN. Don’t use Wi-Fi to do this.
Good luck.
Connected it to Ethernet , it’s displaying the same screen as in my first post. You said how it doesn’t need to access internet initially? But this screen shows up, and I’m confused. I’ve let it run for the past hour, and nothing changed.
An active ethernet connection means not just connecting it to a switch/hub with an ethernet cable. There has to be a DHCP server on the same network otherwise it will just assign itself a self-assigned IP address. If you can connect the switch to your router it should be OK. Check the cables you're using maybe there's an issue there?
If you've done this and it's still not working then perhaps there's a problem elsewhere which you're not mentioning or are not aware of? What does your network consist of? Draw me a diagram if you can and post it on here. The forum posting tools should allow you to do that.
As an aside, which may help/not help, I'm still supporting a MacPro 10.6 server, serving happily away at a graphics design company. I had to reinstall it about 2 years ago - reformat/reinstall etc - and had zero issues with a network that consists of an ISP installed router, 4 Macs, 2 printers and a Gigabit 8-port switch.
Thank you! I’ll try this and tell you how it goes.
Mac Mini server 10.6 installation issues
