You can make a difference in the Apple Support Community!

When you sign up with your Apple Account, you can provide valuable feedback to other community members by upvoting helpful replies and User Tips.

Looks like no one’s replied in a while. To start the conversation again, simply ask a new question.

Mac computer with KVM (no keyboard or mouse)

I have 8x Mac Pro 2013, 3x Mac Minis with an Intel i7 3.0ghz and 1x Lenovo IdeaCentre Q190 Tiny. All of these machines are connected to a CKL CKL-9116H kvm switch. Each system has its video connected via hdmi; usb 2.0 for the keyboard and mouse. The cables are 10’ long.


The problem is that the keyboard and mouse doesn’t work on the Macs, but works on the Lenovo. I have tried a shorter, known working cable still didn’t work. I even tried disabling the Bluetooth on a Mac and still no luck.


Any ideas what is causing this?


I am getting ready to buy a Raritan Dominion KX2 switch and hdmi usb dongles.

Posted on Sep 12, 2024 7:18 PM

Reply
8 replies

Sep 13, 2024 9:03 AM in response to Macrules34

The Power required to run most Mac external keyboards is quite large compared to the power provided by a typical USB port. it is so large that although there are 'convenience' USB outlets on BOTH side of many Mac keyboards, the ONLY supported device is ONE low-power Mac mouse. ANYTHING more causes the keyboard to malfunction.


In addition, the keyboard is very sensitive to cable length. The approved genuine Mac keyboard extension cable is VERY short, and it keyed so that only ONE such extension can be used. it appears that longer cables also cause keyboard malfunctions.

Sep 13, 2024 9:16 AM in response to Macrules34

I would like to suggest a different way to organize these Macs, provided you do not require full-motion Video on each Mac.

Instead of switching a physical display at frighteningly fast Video speeds, connect each Mac in turn using Mac Screen Sharing. This allows you to connect to each 'slave' Mac in turn. The slave Mac's display will appear in a window on the Master Mac. Typing on the Master Mac when that window is frontmost becomes direct keyboard input on the 'Slave' Mac.


One issue is, without some way to tell the remote slave Mac it has a display connected at startup, the default display created can be problematic and/or very small.


There is an inexpensive plug-in device that simply Fakes a connected HDMI display, and can give you up to a 4K fake display buffer to share through screen sharing.


https://eshop.macsales.com/item/NewerTech/ADP4KHEAD -- US$13


.

Sep 14, 2024 9:02 AM in response to Macrules34

<< if that ethernet cable counts towards the length of the usb cable. >>


The fundamental problem is signal strength attenuation (weakening ) with excessive cable length. So addicting a repeater should fix the issue while allowing the distances you require.


But also consider the other solution is suggested above (it might not get emailed to you because I replied to myself) and look at Mac Screen Sharing as a 'no cost' solution that can perform just as well for everything except full-motion Video. This feature is also generally interoperable with VNC screen sharing, so you could get to linux or Windows machines in a similar way.

Mac computer with KVM (no keyboard or mouse)

Welcome to Apple Support Community
A forum where Apple customers help each other with their products. Get started with your Apple Account.