macOS 26 Tahoe: System runs out of application memory (M4 Pro, 48 GB RAM, 2 TB SSD)

Dear community,


I recently bought myself a MacBook Pro with a M4 Pro chip, 48 GB of RAM and a 2 TB SSD hard drive.

It shipped with macOS 15.


After updating to macOS 26 I've experienced the following issues:


1) "Black screen of death" after system sleep

2) After wake up from sleep, I get the message "System has run out of application memory" and the system is completely unresponsive. (Can't check Activity Monitor for details because of that)


I have never experienced these issues with other Macs, and I am on my third Apple silicon machine now. I used the migration assistant to migrate the machine from my former M2 Pro machine.


Could this be a OS issue or is my new hardware faulty?


I attached a screenshot of the "application memory" message, but is in German.


Thank you, best regards


Michael





[Edited by Moderator]

MacBook Pro 14″, macOS 26.0

Posted on Sep 30, 2025 1:02 AM

Reply
Question marked as Top-ranking reply

Posted on Sep 30, 2025 6:39 AM

See if the problem is present when you boot in safe mode, which disables 3rd party extensions and performs some system cleanup.

 

Start up your Mac in safe mode - Apple Support


FWIW, I have your configuration (16" M4 Pro MBP, 48 GB memory, 2 TB SSD). I'm running 26.0.1 (from this morning) and upgraded to Tahoe when it launched, and I've had no issues.

88 replies

Oct 3, 2025 12:47 PM in response to NoCreativeUserName

Like the others, I'm getting the "your system has run out of memory" and a Force Quit dialog. I can't open Activity Monitor because of this. I'm using a 2022 Mac Studio with an M1 chip, running 26.0.1, have 32 GB of RAM and a 2 TB hard drive with 1.3 TB available. When I've checked Activity Monitor, memory used has never been more than 10 GB. This had not been happening on this machine using these same applications before the install of 26.0 or 26.0.1.


Hard not to blame the software . . . .

Oct 7, 2025 5:17 PM in response to NoCreativeUserName

This has happened to me TWICE now.


2021 M1 MacBook Air with 8GB of RAM.


Both times the same... when laptop screen was closed for several hours / overnight.


Very easy to get back to a working state, and I've been monitoring Memory Usage in Activity Monitor after this second incident, but so far, nothing apparent has shown up.


This definitely feels like a "Tahoe" issue, not specific to any one app, or the same thing would have happened prior to upgrading to Tahoe, right? An app may need to be updated for compatibility, though. Just don't know which one is at fault yet.


Oct 8, 2025 11:23 AM in response to neuroanatomist

not Apple’s responsibility to make macOS compatible with everything.


Disagree because everyone reporting this has only one thing in common — Tahoe — and that this is consistently being observed after a period of inactivity/sleep.


I don't have any Adobe apps installed.


Yes, individual app developers need to maintain compatibility, but the OS clearly needs to do a better job identifying when this issue is occurring, and take some proactive steps to avoid the whole system pausing.


That it's happening across a mix of 3rd-party apps, or a common Apple app, is where it gets hard to identify.

Oct 10, 2025 2:06 AM in response to NoCreativeUserName

This has happened to me on both my MacBook Air and Mac Studio on four or five occasions now, usually when I wake up the device after it has been sleeping overnight. Only happened since Tahoe. I have different apps and extensions on each device, though with some overlap. Could indeed be a third-party extension, but maybe not due to a change with the extension but with some change to Tahoe or some new restriction. Whether it is the extension or Tahoe that needs fixing is another matter. Either way, it is a very inelegant crash! It is a shame that Tahoe doesn't do more to tell us what app or extension likely led to the crash. A lot of guesswork is involved.

Oct 10, 2025 10:48 AM in response to Billybucks

The following does not solve the problem but may help elucidate some as to what is happening.


For this situation of”out of application memory”, it has relatively little relevance whether your system has 8GB or 48GB. Let me explain. A memory leak happens when some software error results in wn app, service, or other piece of software request a lot RAM and fails to properly release that RAM. When memory in use is more than the physical memory, the OS will use several things to cope - use virtual memory (space on your drive), and/or compress some of the contents that are not actively used.


Of course, the lesser memory installed, the sooner the OS needs to use these things. This is one reason why systems with more memory typically perform better under load.


But ULTIMATELY the error occurs not when physical memory is exhausted, but when VIRTUAL Memory is exhausted.



Oct 24, 2025 4:37 AM in response to NoCreativeUserName

I have a Mac Studio M1 Max and I have similar issues. This morning all apps were showing non-responsive and the message advised low application memory. Had to do a hard reboot.


On top of that over 100GB of hard drive space disappeared. I have a 2TB hard drive and had 357GB free last night. This morning I had only 158GB free and that app memory message.

Looks like Tahoe has a memory leak problem!

Oct 28, 2025 3:14 PM in response to NoCreativeUserName

Me too. MacBook Pro M1 Pro 2020, 16GB of RAM. I have colleagues with much newer macs and much more memory. Same thing. By the time that the apps get paused by the system -- it's impossible to start to force quit them because they quickly all start to get paused, and then the only option is to force power off the mac. Super annoying, especially during work zoom calls. Only started happening with 26.0.1 (25A362) The mac has been mostly flawless until now. This is critical to fix.

Nov 6, 2025 7:06 AM in response to NoCreativeUserName

Today, I completely wiped my MacBook Pro 16" with M1 Max and 64 GB RAM and restored it from the TM backup. The problem was occurring more and more frequently—in the last sessions every hour. Safe boot, deleting apps, etc. didn't help at all. After the new setup I was able to work normally for a few hours, but now macOS has started pausing apps again and reporting that the application memory is running low. It's really frustrating.

Sep 30, 2025 4:06 AM in response to NoCreativeUserName

After upgrading to MacOS 26, I have received the very same "System has run out of application memory" error message twice now after waking my device from sleep. I've never had this issue before, even when I've been a lot more apps at once. My machine is an M3 MacBook Air, but only has 8gb of RAM, so I thought it could be due to my inadequate memory. Seeing that your machine has 48gb and is having the same issue makes me believe it is an OS issue.

Oct 2, 2025 3:38 PM in response to NoCreativeUserName

Ditto. Twice in the last week, I've come back to an alert that my Mac has run out of memory. Needed to Force Quit everything that was open.


Not doing anything that I didn't do before upgrading to MacOS Tahoe


Mac Studio M4, 64 GB RAM, 4 TB SSD, MacOS 26.0.1


Could be an application issue if changes were needed for Apps under Tahoe, but I suspect an OS memory leak,


Will gladly file a bug report, but not sure how to describe it in the report....

macOS 26 Tahoe: System runs out of application memory (M4 Pro, 48 GB RAM, 2 TB SSD)

Welcome to Apple Support Community
A forum where Apple customers help each other with their products. Get started with your Apple Account.